average about 100 command signals are transmitted per second,
which equals a transfer rate of 9600 Bd.
Built in anti-collision programs ensure a maximum transmission
of data even during “network
Transmission takes place in the baseband. Therefore no further equipment
such as phase discriminators, filters etc. are required.
Possible RF interference is kept to a minimum!
As already mentioned above, the data cable is solely used
for the transfer of data. Signal levels reach a maximum of
30Vpp. All bus modules have a built in 2kV surge protection.
Main voltage, placed on the data line by mistake, does not
harm the LCN modules.